- The body is made of 2.00 mm. curled up in one piece of iron sheet ,given form with pressed and strength has been increased.Bottom corners and top are radius. Installation of manufactured from the same sheet with the body iron sheets, pressing the edges of the side iron sheets† formed of at least 15 mm. width can twisted ledge or lip including all surroundings and radius, with this protrusion the side iron sheets and body sheets are uninterrupted merged from outboard with radius .
- Opening of the body 25.00 x50.00×2.00 mm. of size, body and side iron sheets are frame as self- bent
- The body source and the other sources made by the technique of gaseous with dross-free, uninterrupted by boiling and were made in closed water the body.
- The lifting trunnions are 4.00 mm. and they are welded to the body with reinforcement.At sides carrying handles are existed.
- Container lids are made of 1.50 mm. iron sheet, lid system is made can be opening around its axis and to lid are given strengthening form.
- There are 4 carrying rollers with the size of 150 x45 mm. two of, swivel 360, two of them are fixed
- Containers all inside and outside included lid minimum an average 80-90 micron coating thickness galvanized.
- In the front side can be written any requested things
Category: Metal Containers